Dell IDRAC6 User Manual page 54

Table 4-5. IPv6 Settings
Setting
Preferred DNS
Server
Alternate DNS
Server
Table 4-6. IPMI Settings
Setting
Enable IPMI Over
LAN
Channel Privilege
Level Limit
Encryption Key
Table 4-7. VLAN Settings
Setting
Enable VLAN ID
VLAN ID
Priority
54
Configuring the iDRAC6 Using the Web Interface
(continued)
Description
Configures the static IPv6 address for the preferred DNS server.
To change this setting, you must first uncheck Use DHCP to
obtain DNS Server Addresses.
Configures the static IPv6 address for the alternate DNS server.
To change this setting, you must first uncheck Use DHCP to
obtain DNS Server Addresses.
Description
When checked, indicates that the IPMI LAN channel is
enabled. The default is Off.
Configures the minimum privilege level, for the user, that can
be accepted on the LAN channel. Select one of the following
options: Administrator, Operator, or User. The default is
Administrator.
Configures the encryption key: 0 to 20 hexadecimal characters
(with no blanks allowed). The default value is all zeros.
Description
If enabled, only matched Virtual LAN (VLAN) ID traffic will
be accepted.
VLAN ID field of 802.1g fields. Enter a valid value for VLAN ID
(must be a number from 1 to 4094).
Priority field of 802.1g fields. Enter a number from 0 to 7 to set
the priority of the VLAN ID.