Configuring The Idrac6 Network Settings; Accessing The Idrac6 Through A Network - Dell IDRAC6 User Manual

Table 5-12. Terminal Mode Settings Page Buttons
Button
Return to Serial Port
Configuration
Apply Changes

Configuring the iDRAC6 Network Settings

CAUTION:
Changing your iDRAC6 Network settings may disconnect your current
network connection.
Configure the iDRAC6 network settings using one of the following tools:
• Web-based Interface — See "Configuring the iDRAC6 NIC" on page 49
• RACADM CLI — See cfgLanNetworking in the iDRAC6 Administrator
Reference Guide available on the Dell Support website at
support.dell.com/manuals.
• iDRAC6 Configuration Utility — See "Configuring Your System to Use
an iDRAC6" on page 34
NOTE:
If you are deploying the iDRAC6 in a Linux environment, see "Installing
RACADM" on page 38.

Accessing the iDRAC6 Through a Network

After you configure the iDRAC6, you can remotely access the managed
system using one of the following interfaces:
• Web-based interface
• RACADM
• Telnet Console
• SSH
• IPMI
Description
Return to the Serial Port Configuration page.
Apply the terminal mode settings changes.
Advanced iDRAC6 Configuration
(continued)
109