Configuring A Supported Web Browser; Configuring Your Web Browser To Connect To The Idrac6 Web-Based Interface; List Of Trusted Domains - Dell IDRAC6 User Manual

usb 5-2: device descriptor not accepting
address 2, error -71
These errors are cosmetic in nature and should be ignored. These messages
are caused due to reset of the USB devices during the firmware update
process and are harmless.

Configuring a Supported Web Browser

The following sections provide instructions for configuring the supported
Web browsers.
Configuring Your Web Browser to Connect to the iDRAC6 Web-Based
Interface
If you are connecting to the iDRAC6 Web-based interface from a
management station that connects to the Internet through a proxy server,
you must configure the Web browser to access the Internet from this server.
To configure your Internet Explorer Web browser to access a proxy server:
1 Open a Web browser window.
2 Click Tools, and click Internet Options.
3 From the Internet Options window, click the Connections tab.
4 Under Local Area Network (LAN) settings, click LAN Settings.
5 If the Use a proxy server box is selected, select the Bypass proxy server for
local addresses box.
6 Click OK twice.

List of Trusted Domains

When you access the iDRAC6 Web-based interface through the Web
browser, you are prompted to add the iDRAC6 IP address to the list of trusted
domains if the IP address is missing from the list. When completed, click
Refresh or relaunch the Web browser to reestablish a connection to the
iDRAC6 Web-based interface.
Basic Installation of the iDRAC6
41