Dell IDRAC6 User Manual page 62

Under IPMI LAN Settings in the Encryption Key field, type the
encryption key and click Apply.
NOTE:
characters with a maximum of 40 characters.
3 Configure IPMI Serial over LAN (SOL).
In the System tree, click Remote Access.
a
Click the Network/Security tab and then click Serial Over LAN.
b
In the Serial Over LAN page, select Enable Serial Over LAN.
c
Update the IPMI SOL baud rate.
d
NOTE:
is identical to your managed system's baud rate.
Click the Baud Rate drop-down menu, select the appropriate baud
e
rate, and click Apply.
Update the minimum required privilege. This property defines
f
the minimum user privilege that is required to use the Serial
Over LAN feature.
Click the Channel Privilege Level Limit drop-down menu and then
select either User, or Operator, or Administrator.
Click Apply.
g
4 Configure IPMI Serial.
In the Network/Security tab, click Serial.
a
In the Serial menu, change the IPMI serial connection mode to the
b
appropriate setting.
Under IPMI Serial, click the Connection Mode Settings drop-down
menu, and select the appropriate mode.
Set the IPMI Serial baud rate.
c
Click the Baud Rate drop-down menu, select the appropriate baud
rate, and click Apply.
Set the Channel Privilege Level Limit and Flow Control.
d
Click Apply.
e
62
Configuring the iDRAC6 Using the Web Interface
The encryption key must consist of an even number of hexadecimal
To redirect the serial console over LAN, ensure that the SOL baud rate