Supported Screen Resolutions And Refresh Rates; Configuring Virtual Console In The Idrac6 Web Interface - Dell IDRAC6 User Manual

2 Ensure that the Enable Protected Mode option is not selected for Trusted
Sites zone. Alternatively, you can add the iDRAC address to sites in the
Intranet zone. By default, protected mode is turned off for sites in Intranet
Zone and Trusted Sites zone.
3 Click Sites.
4 In the Add this website to the zone field, add the address of your iDRAC
and click Add.
5 Click Close and then click OK.
6 Close and restart the browser for the settings to take effect.

Supported Screen Resolutions and Refresh Rates

Table 9-1 lists the supported screen resolutions and corresponding refresh
rates for a Virtual Console session that is running on the managed server.
Table 9-1. Supported Screen Resolutions and Refresh Rates
Screen Resolution
720x400
640x480
800x600
1024x768
1280x1024

Configuring Virtual Console in the iDRAC6 Web Interface

To configure Virtual Console in the iDRAC6 Web interface, perform the
following steps:
1 Click System Console/MediaConfiguration to configure iDRAC6
Virtual Console settings.
2 Configure the Virtual Console properties. Table 9-2 describes the settings
for Virtual Console.
3 When completed, click Apply.
4 Click the appropriate button to continue. See Table 9-3.
208
Using GUI Virtual Console
Refresh Rate (Hz)
70
60, 72, 75, 85
60, 70, 72, 75, 85
60, 70, 72, 75, 85
60