Dell IDRAC6 User Manual page 354

5 Click the appropriate Services page button to continue. See Table 22-13.
Table 22-6. Local Configuration Settings
Setting
Disable the iDRAC local
configuration using option
ROM
Disable the iDRAC local
configuration using RACADM
Table 22-7. Web Server Settings
Setting
Enabled
Max Sessions
Active Sessions
Timeout
HTTP Port Number
HTTPS Port Number
354
Configuring Security Features
Description
Disables local configuration of the iDRAC using
option ROM. The option ROM prompts you to
enter the setup module by pressing <Ctrl+E>
during system reboot.
Disables local configuration of the iDRAC using
local RACADM.
Description
Enables or disables the Web server. Checked=Enabled;
Unchecked=Disabled.
The maximum number of simultaneous sessions allowed
for this system.
The number of current sessions on the system, less than
or equal to the Max Sessions.
The time, in seconds, that a connection is allowed to
remain idle. The session is cancelled when the time-out is
reached. Changes to the timeout setting take affect
immediately and terminate the current Web interface
session. The Web server will also be reset. Please wait for
a few minutes before opening a new Web interface
session. The time-out range is 60 to 10800 seconds. The
default is 1800 seconds.
The port used by the iDRAC that listens for a server
connection. The default setting is 80.
The port used by the iDRAC that listens for a server
connection. The default setting is 443.