Dell IDRAC6 User Manual page 126

(if certificate issued to IP) of the iDRAC6 (for example, 192.168.0.120) or
the registered DNS iDRAC6 name (if certificate issued to iDRAC
registered name).
To ensure that the CSR matches the registered DNS iDRAC6 name:
1 In the System tree, click Remote Access.
2 Click the Network/Security tab and then click Network.
3 In the Common Settings table:
Select the Register iDRAC on DNS check box.
a
In the DNS iDRAC Name field, enter the iDRAC6 name.
b
4 Click Apply Changes.
See "Securing iDRAC6 Communications Using SSL and Digital Certificates"
on page 349 for more information about generating CSRs and issuing
certificates.
Why are the remote
property change?
It may take a while for the remote RACADM services and the Web-based
interface to become available after the iDRAC6 Web server resets.
The iDRAC6 Web server is reset after the following occurrences:
• When the network configuration or network security properties are
changed using the iDRAC6 Web user interface
When the cfgRacTuneHttpsPort property is changed (including when a
•
config -f <config file> changes it)
• When racresetcfg is used
• When the iDRAC6 is reset
• When a new SSL server certificate is uploaded
Why doesn't my DNS server register my iDRAC6?
Some DNS servers only register names of 31 characters or fewer.
126
Advanced iDRAC6 Configuration
and Web-based services unavailable after a
RACADM