Dell IDRAC6 User Manual page 115

Table 5-15. RACADM Subcommands
Command
help
help
<subcommand>
arp
clearasrscreen
clrraclog
config
getconfig
coredump
coredumpdelete
fwupdate
getssninfo
getsysinfo
getractime
ifconfig
netstat
ping
setniccfg
sshpkauth
getniccfg
getsvctag
racdump
racreset
racresetcfg
serveraction
Description
Lists iDRAC6 subcommands.
Lists usage statement for the specified subcommand.
Displays the contents of the ARP table. ARP table entries may
not be added or deleted.
Clears the last ASR (crash) screen (last blue screen).
Clears the iDRAC6 log. A single entry is made to indicate the
user and time that the log was cleared.
Configures the iDRAC6.
Displays the current iDRAC6 configuration properties.
Displays the last iDRAC6 coredump.
Deletes the coredump stored in the iDRAC6.
Executes or displays status on iDRAC6 firmware updates.
Displays information about active sessions.
Displays general iDRAC6 and system information.
Displays the iDRAC6 time.
Displays the current iDRAC6 IP configuration.
Displays the routing table and the current connections.
Verifies that the destination IP address is reachable from the
iDRAC6 with the current routing-table contents.
Sets the IP configuration for the controller.
Enables you to upload up to 4 different SSH public keys, delete
existing keys, and view the keys already in iDRAC6.
Displays the current IP configuration for the controller.
Displays service tags.
Dumps iDRAC6 status and state information for debug.
Resets the iDRAC6.
Resets the iDRAC6 to the default configuration.
Performs power management operations on the managed system.
Advanced iDRAC6 Configuration
115