Collect System Inventory on Restart
Select Enabled to allow the collection of inventory during boot. See the Dell
Lifecycle Controller User Guide available on the Dell Support Website at
support.dell.com/manuals for more information.
NOTE:
Modifying this option restarts the server after you have saved your settings
and exited from the iDRAC6 Configuration Utility.
NOTE:
If you choose to restore to factory defaults, the settings for Collect System
Inventory on Restart does not change.
LCD Configuration
Press <Enter> to display the LCD Configuration submenu. When you have
finished configuring the LCD parameters, press <Esc> to return to the
previous menu.
Table 17-2. LCD User Configuration
LCD Line 1
LCD User-Defined
String
LCD System Power
Units
LCD Ambient Temp
Units
310
Using the iDRAC6 Configuration Utility
Press <Right Arrow>, <Left Arrow >, and spacebar to switch
between the options.
This feature sets the Home display on the LCD to one of the
following options:
Ambient Temp, Asset Tag, Host Name, iDRAC6 IPv4
Address, iDRAC6 IPv6 Address, iDRAC6 MAC Address,
Model Number, None, Service Tag, System Power,
User-Defined String.
If LCD Line 1 is set to User-Defined String, view or enter the
string to be displayed on the LCD.
The string can be maximum of 62 characters long.
If LCD Line 1 is set to System Power, select Watt or BTU/hr
to specify the Unit to be displayed on the LCD.
If LCD Line 1 is set to Ambient Temp, select Celsius or
Fahrenheit to specify the Unit to be displayed on the LCD.