Cfgserialconsolequitkey (Read/Write); Cfgserialconsoleidletimeout (Read/Write); Cfgserialconsoleshelltype (Read/Write) - Dell Remote Access Controller 4 Firmware Version 1.30 User Manual

cfgSerialConsoleQuitKey (Read/Write)

NOTE:
To modify this property, you must have Configure DRAC 4 permission.
Legal Values
A string of 3 or less characters.
Default
The <CR><~><.> key combination
The <CR> key represents a carriage return; press <Enter> as a substitute for <CR>.
Description
This key sequence terminates text console redirection when using VT-100.

cfgSerialConsoleIdleTimeout (Read/Write)

NOTE:
To modify this property, you must have Configure DRAC 4 permission.
Legal Values
Integer from 1 to any positive number. Type hexadecimal values.
Default
0x12c
Description
The maximum number of time (in seconds) of line idle time before the line is disconnected.
(Type hexadecimal values.)

cfgSerialConsoleShellType (Read/Write)

NOTE:
To modify this property, you must have Configure DRAC 4 permission.
Legal Values
1 = VT100 block screen interface, has limited command function compared to type 2.
2 =UNIX-style command line data stream interface.
Default
Default 2
Description
Sets the serial console shell type. (Type hexadecimal values.)
DRAC 4 Property Database Group and Object Definitions
201