Dell Remote Access Controller 4 Firmware Version 1.30 User Manual page 81

Table 4-31. DRAC 4 Log Messages (continued)
Message ID Description
RAC065A DRAC 4 hard reset, delay
<seconds> was initiated.
RAC066A DRAC 4 soft reset, delay
<seconds> was initiated.
RAC067A DRAC 4 graceful reset, delay
<seconds> was initiated.
RAC068A DRAC 4 cfg2default reset, delay
<seconds> was initiated.
RAC069A DRAC 4 shutdown was initiated. Provides information only.
RAC114A Requested server
{powerdown|powerup|
powercycle|hardreset|
graceshutdown|gracereboot|
gracereboot}.
RAC115A Could not log graceful server
action to hardware log.
RAC122A DRAC 4 booted.
RAC138A Console redirect session enabled. Provides information only.
RAC139A Console redirect session disabled. Provides information only.
RAC154A Logout from <IP address>.
RAC155A Login from <IP address>.
RAC156A Session cancelled from
<IP address>, max log in
attempts exceeded.
RAC157A Session cancelled from
<IP address>, due to inactivity.
RAC158A Nonvalidated session from
<IP address> cancelled.
RAC159A Start console redirection.
RAC160A End console redirection.
RAC161E Maximum sessions exceeded.
RAC162E Maximum per user connections
exceeded.
RAC163E User lacks permission.
Suggested Action
Provides information only.
Provides information only.
Provides information only.
Provides information only.
Provides information only.
Provides information only.
Provides information only.
Provides information only.
Provides information only.
Provides information only.
Provides information only.
Provides information only.
Provides information only.
Provides information only.
Wait until another user closes a session.
Close one of your sessions.
Log in as a user with appropriate permissions.
Managing and Recovering a Remote System
81