Cfgnettuningipsubnetsarelocal (Read/Write); Tuning The Drac 4 For Satellite Connectivity; Drac 4 Properties For Satellite Connectivity - Dell Remote Access Controller 4 Firmware Version 1.30 User Manual

cfgNetTuningIpSubnetsAreLocal (Read/Write)

NOTE:
Legal Values
1 or 0
Default
1
Description
Packets addressed to subnets of the local net do not go to the gateway.

Tuning the DRAC 4 for Satellite Connectivity

The racadm CLI may be used to modify the network tuning properties of the DRAC 4. It is also
possible to use the racadm.cfg file to modify these properties (similar to the manner in which
.ini files are used).
racadm config -g cfgNetTuning -o cfgNetTuningNicMtu < value >
racadm config -g cfgNetTuning -o cfgNetTuningIpTtl < value >
racadm config -g cfgNetTuning -o cfgNetTuningIpReassTtl < value >
racadm config -g cfgNetTuning -o cfgNetTuningTcpSrttBase < value >
racadm config -g cfgNetTuning -o cfgNetTuningTcpSrttDflt < value >
racadm config -g cfgNetTuning -o cfgNetTuningTcpReXmtMin < value >
racadm config -g cfgNetTuning -o cfgNetTuningTcpReXmtMax < value >
racadm config -g cfgNetTuning -o cfgNetTuningTcpMsl < value >
where <value> is obtained from Table B-2.
Table B-2. DRAC 4 Properties for Satellite Connectivity
Property
cfgNetTuningNicMtu
cfgNetTuningIpTtl
cfgNetTuningIpReassTtl
cfgNetTuningTcpSrttBase
cfgNetTuningTcpSrttDflt
208
DRAC 4 Property Database Group and Object Definitions
To modify this property, you must have Configure DRAC 4 permission.
Normal Value
0x5dc
0x40
0x3c
0
0x6
Satellite Value
0x1f4
0x80
0x78
0x100
0x180