Table of Contents
Advertisement
Table 4-28. Diagnostic Commands
Command
arp
ifconfig
netstat
ping <IP Address>
getcoredump
settracelog
gettracelog
nettrace
The Diagnostic Console page provides buttons (see Table 4-29) in the top-right corner of
the page.
Table 4-29. Diagnostic Console Page Buttons (Top Right)
Button
Action
Refresh
Reloads the Diagnostic Console page.
Description
Displays the contents of the Address Resolution Protocol (ARP) table.
ARP entries may not be added or deleted.
Displays the contents of the network interface table.
Prints the content of the routing table. If the optional interface number is
provided in the text field to the right of the netstat option, then netstat prints
additional information regarding the traffic across the interface, buffer usage,
and other network interface information.
Verifies that the destination IP address is reachable from the DRAC 4 with the
current routing-table contents. A destination IP address must be entered in the
field to the right of this option. An Internet control message protocol (ICMP)
echo packet is sent to the destination IP address based on the current
routing-table contents.
Displays the last controller crash, including detailed information such as register
values and a memory map recorded when the most recent controller crash
occurred; displays the message "
previous controller crash has occurred or if the data has been deleted.
Enables you to set debug trace levels to identify the types of messages being sent
on the local network. The -d option traces the DHCP packets sent and received.
The -i option traces IP packets sent and received. For example, type
to trace IP packets sent and received.
settracelog -i
Displays a UNIX-style system log. This log is a volatile, memory-resident log that
contains time-stamped entries.
Enables you to view your current trace log settings.
No CORE dump available
Managing and Recovering a Remote System
" if no
77
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
