Dell Remote Access Controller 4 Firmware Version 1.30 User Manual page 37

Table 2-1. DRAC 4 IDE Option ROM Utility Properties (continued)
Properties
DNS Configuration Options
Servers from DHCP The available settings are Disabled and Enabled. Press <u> to toggle the
Static DNS Server 1: Indicates the preset static IP address of the first DNS server that the DRAC 4
Static DNS Server 2: Indicates the preset static IP address of the second DNS server that the DRAC 4
Register RAC Name The available settings are Disabled and Enabled. Press <c> to toggle the setting.
Static Domain
Name
Virtual Media Configuration Options
Virtual Media is:
Description
setting. The default setting is Disabled, which indicates that the DRAC 4 is
using preset static IP addresses. When this option is selected, the DHCP server
provides the DNS server IP addresses.
If Use DHCP (described earlier in this table) is set to Disabled, this option is
grayed out and you cannot modify this field.
uses if Servers from DHCP is disabled. The default is 192.168.0.5. Press <1> to
change this address. If Servers from DHCP is Enabled, this option is grayed out
and you cannot modify this field.
uses if Servers from DHCP is disabled. The default is 192.168.0.6. Press <2> to
change this address. If you do not have a second DNS server, you may enter
0.0.0.0 for the IP address. If Servers from DHCP is Enabled, this option is
grayed out and you cannot modify this field.
The default setting is Disabled. The default RAC name is RAC-service tag, where
service tag is the service tag number of the Dell server (for example, RAC-
EK00002). When this option is selected, the RAC name is displayed. You can
modify the RAC name only when toggling from the Disabled setting. If this
option is set to Enabled, you can modify the RAC name by pressing <c> twice.
The default setting is Disabled. The default static domain name is
MYDOMAIN. Press <f> to toggle the setting. When this option is selected,
the static domain name is displayed. You can modify the domain name only
when toggling from the Disabled setting by pressing <f>. However, if Use
DHCP (described earlier in this table) is set to Disabled, you cannot set Static
Domain Name to Disabled. If Register RAC Name is Disabled, this option is
grayed out and you cannot modify this field.
Indicates whether Virtual Media is enabled or disabled. Press <e> to toggle
the setting.
Installing and Setting Up the DRAC 4
37