Exporting The Domain Controller Root Ca Certificate; Importing The Drac 4 Firmware Ssl Certificate To All Domain Controllers Trusted Certificate Lists - Dell Remote Access Controller 4 Firmware Version 1.30 User Manual

Exporting the Domain Controller Root CA Certificate

NOTE:
The following steps may vary slightly if you are using Windows 2000.
1 Go to the domain controller on which you installed the Microsoft Enterprise CA service.
2 Click Start
3 Type mmc and click OK.
4 In the Console 1 (MMC) window, click File (or Console on Windows 2000 systems) and
select Add/Remove Snap-in.
5 In the Add/Remove Snap-In window, click Add.
6 In the Standalone Snap-In window, select Certificates and click Add.
7 Select Computer account and click Next.
8 Select Local Computer and click Finish.
9 Click OK.
10 In the Console 1 window, expand the Certificates folder, expand the Personal folder, and
click the Certificates folder.
11 Locate and right-click the root CA certificate, select All Tasks, and click Export... .
12 In the Certificate Export Wizard, click Next, and select No do not export the private key.
13 Click Next and select Base-64 encoded X.509 (.cer) as the format.
14 Click Next and save the certificate to a location of your choice. You will need to upload this
certificate to the DRAC 4. To do this, go to the DRAC 4 Web-based interface
Configuration tab
commands (see "Configuring the DRAC 4 Active Directory Settings Using the racadm CLI").
15 Click Finish and click OK.
Importing the DRAC 4 Firmware SSL Certificate to All Domain Controllers Trusted
Certificate Lists
NOTE:
If the DRAC 4 firmware SSL certificate is signed by a well-known CA, you do not need to perform
the steps described in this section.
NOTE:
The following steps may vary slightly if you are using Windows 2000.
1 The DRAC 4 SSL certificate is the same certificate that is used for the DRAC 4 Web server.
All DRAC 4 controllers are shipped with a default self-signed certificate. You can get this
certificate from the DRAC 4 by selecting the DRAC 4 Web-based interface Configuration
tab Active Directory subtab
2 On the domain controller, open an MMC Console window and select Certificates
Root Certification Authorities.
3 Right-click Certificates, select All Tasks and click Import.
98
Using the DRAC 4 With Microsoft
Run.
Active Directory page. Alternately, you may use the racadm CLI
Download DRAC 4 Server Certificate.
®
Active Directory
Trusted