Adding And Configuring Drac 4 Users; Adding And Configuring Snmp Alerts - Dell Remote Access Controller 4 Firmware Version 1.30 User Manual

3 After you have made the changes you want, you can press <r> to save the changes and reboot
the DRAC 4, or you can press <Esc> to cancel all changes and exit the setup menu. If you
decide to save your changes, the following message appears:
IMPORTANT: In order for your changes to take effect, they need
to be saved. Your computer will then continue booting normally.
Would you like to save the changes and continue now(<Y> or <N>)?
Or if Virtual Media settings have changed, the following message appears:
IMPORTANT: In order for your changes to take effect, they need
to be saved. For Virtual Media settings to take effect, a
reboot is required.
Would you like to save the changes and reboot now (<Y> or <N>)?
4 Press <Y> to save the changes or <N> to return to the setup menu.
NOTE:
When the DRAC 4 registers with the DNS server, it adds an extra line with a long string of
characters. This TXT entry in the database is an encrypted string that is used to uniquely identify the
owner of the DDNS entry and to serialize update operations. The TXT entry is associated with the
RAC DDNS name. Manually removing or modifying either the A record or TXT record associated with
cfgDNSRacName, through the DNS server administrative interface, causes unexpected results
(for example, the server cannot resolve the name, the server cannot update the name, and the server
returns the incorrect information for the name).
NOTE:
The DRAC 4 DDNS implementation requires that DNS servers be configured to allow
nonsecure updates.
NOTE:
DDNS events can be found in the DRAC 4 trace log. To view DDNS events, use the gettracelog
command on the Web-based interface Diagnostics page or use the racadm gettracelog command.

Adding and Configuring DRAC 4 Users

Add and configure DRAC 4 users using one of the following tools:
• Web-based interface — See "Adding and Configuring DRAC 4 Users."
• racadm CLI — See "cfgUserAdmin."

Adding and Configuring SNMP Alerts

NOTE:
DRAC 4 Alert information in Management Information Base (MIB) format can be found in the
rac_host MIB.
Add and configure SNMP alerts using one of the following tools:
• Web-based Interface — See "Adding and Configuring SNMP Alerts."
• racadm CLI — See "cfgTraps."
38
Installing and Setting Up the DRAC 4