Panasonic WJ-SX550A Operating Instructions Manual page 102

3. Monitor Selection
Select the desired monitor by pressing the Numeric Keys,
then press the Monitor (MON) Key.
A1
Camera
Monitor 01
Camera
Monitor 01
Camera
Monitor 02
Note: If the CAM-P Mode is selected On mode, press
the Function (F1) Key instead of the Monitor
(MON) Key.
4. Camera Selection
Select the desired camera by pressing the Numeric Keys,
then press the Camera (CAM) Key.
6
A1
Camera
Monitor 02
Camera
Monitor 02
Camera
Monitor 02
Note: The selected camera will be assigned to
the currently selected monitor.
1 2 3
4 5 6
7 8 9
0
MON CAM
ESC SET
2
1 2 3
4 5 6
7 8 9
0
MON CAM
ESC SET
1
01
Press the Increment (INC + 1 CAM) Switch to replace the
presently selected camera with the next higher camera
number.
Press the Decrement (DEC 1 CAM) Switch to replace the
presently selected camera with the next lower camera
number.
5. Contrast and Back Light Adjustment
of LCD
By pressing the Cursor (A, D, B) Keys at the same
time, the following display appears on the LCD.
Contrast
(Zoom) 90(Focus) 99
a) Contrast Adjustment
Press the Zoom (ZOOM TELE/WIDE) Control to adjust
the contrast of the characters displayed on the LCD
while pressing the Cursor (A, D, B) Keys at the
same time.
TELE : increases the character contrast (00
WIDE : decreases the character contrast (99
b) Back Light Adjustment
Press the Focus (FOCUS NEAR/FAR) Control to
adjust the back light of the LCD while pressing the
Cursor (A, D, B) Keys at the same time.
NEAR: increases the back light brightness (00
FAR: decreases the back light brightness (99
-98-
INC
+1CAM
DEC
-1CAM
BackLight
99)
00)
99)
00)