Panasonic WJ-SX550A Operating Instructions Manual page 70

Matrix switcher and system controller
Hide thumbs Also See for WJ-SX550A:
Table of Contents

Advertisement

SET UP MENU
The Set Up Menu provides a way for controlling functions
not available through direct keyboard input. It is accessi-
ble to system operators with the proper operator level. The
Set Up Menu also provides access for system program-
ming to authorized operators.
To access the Set Up Menu:
1. Log-in to system.
See page 95 for details.
2. Select the desired monitor for viewing Set Up Menu.
Refer to Monitor Selection on page 98.
3. Select the Set Up Menu (A6) on the LCD by pressing
the Cursor Keys.
Set Up Menu
On
F1 F2
Note: The default setting is set up on. Pressing the
(F1) Key at this point will allow access to the Set
Up Programming Menu if such access is autho-
rized by operator's level. If PROHIBITED appears
on the LCD, press the Escape (ESC) Key to
return the Set Up Menu display.
5
4. Press the Function (F1) Key to allow access to the Set
Up Programming Menu (Set Up Menu).
The menu now appears on the selected monitor.
Set Up Menu
Next
F1 F2
In the Set Up Menu, the following keys and switches
are valid:
Function Keys
F1: Selects the next page.
F2: Selects the previous page.
F3: Deletes or initializes the setting where the cursor
is positioned.
F4: Opens the Pop Up Window
F3 F4
Pre
Del PopUp
F3 F4
Executes the setting or Selection.
CAM
SET
Escapes from the programming mode or
MON
menu.
ESC
Performs various functions, depending on
INC
DEC
selected menu
+1CAM
-1CAM
To access the Printer Menu:
1. Press the Cursor (C) key to access the menu on the
LCD as shown below.
Set Up Menu
Print Clear
F1 F2
2. Press the Function (F1) Key to open the Pop Up
Window, select the desired print out mode by moving
the Joystick Controller.
Pressing the Set (SET) key to start printing out the
selected set up data.
Press the Escape (ESC) key to stop printing.
To Clear all data from a table:
1. Press the Function (F2) Key to open the Pop Up
Window, select "Yes" by moving the Joystick Controller
and pressing the Set (SET) key to delete all data from
the selected programmed table.
-66-
F3 F4

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Wj-cu550a

Table of Contents