Panasonic WJ-SX550A Operating Instructions Manual page 19

• Auto Skip Function
The Auto Skip function is available in sequence. If there is no video signal present at a step, the sequence will automatically
skip that step.
This function is enabled with the Programming Set Up Menu.
• Dwell Time
The amount of time each camera is displayed on the monitor (Dwell Time) can be set from 1 sec. to 30 sec. with 1 sec. incre-
ments.
This is set with the Programming Set Up Menu.
Also, External Timing, which is controlled from the Time Lapse VTR, can be selected with the Programming Set Up Menu.
Dwell time: 3 sec.
2
6-2. Tour Sequence
A Tour Sequence consists of 64 steps. Each step has a Camera, Dwell Time, AUX Control and Pan/Tilt Preset assigned to it.
A Tour can be assigned to any monitor.
Monitor 1
Dwell time: 5 sec.
A total of 32 Tour Sequence can be programmed with the Set Up Menu.
Monitor 1 Monitor 1
Dwell time: 3 sec.
Step 1 Step 2
s
Tour Sequence
T1 T2 T3 T4 T5 T6
T9 T10 T11 T12 T13 T14 T15 T16
T17 T18 T19 T20 T21 T22 T23 T24
T25 T26 T27 T28 T29 T30 T31 T32
32 Tours In Any Monitor
Monitor 1
Dwell time: 3 sec.
Step 1 Step 2
s
Monitor 1 Monitor 1
Dwell time: 3 sec. Dwell time: 3 sec.
Step 3
s s
T7 T8
Monitor 1 Monitor 1
Dwell time: 10 sec. Dwell time: 5 sec.
Step 3 Step 4
s s
-16-
Monitor 1
Dwell time: 3 sec.
Step 4 Step 5
s
Monitor 1
Monitor 2
Monitor 3
Monitor 4
Monitor 15
Monitor 16
Monitor 1
Dwell time: 3 sec.
Step 5
s