Panasonic WJ-SX550A Operating Instructions Manual page 108

6. Press the Backward Sequence (BACK SEQ) Switch to
continue a sequence that was previously stopped by
the Stop (STOP) Switch. The sequence will continue in
the reverse direction from the step that was selected
at the time the Stop Switch was pressed.
T-Seq
Monitor 16
7. Press the Increment (INC + 1CAM) Switch to move a
sequence one step forward from the step that was
previously stopped by the Stop (STOP) Switch.
T-Seq
Monitor 16
8. Press the Decrement (DEC - 1CAM) Switch to move a
sequence one step backward from the step that was
previously stopped by the Stop (STOP) Switch.
6
T-Seq
Monitor 16
9. Press the Forward Sequence (FORWARD SEQ)
Switch, after pressing the Alternate (ALT) Switch, to
start the Tour Sequence from the beginning of the
sequence pattern that was previously stopped by the
Stop (STOP) Switch.
10. To cancel the Tour Sequence select a camera.
Refer to the Camera Selection on page 98.
BACK
SEQ
01
INC
+1CAM
01 Stop
DEC
-1CAM
01 Stop
FORWARD
SEQ ALT
7-3 Group Sequence
The following functions are available only if a Group
Sequence has been previously established through the Set
Up Menu. As described on page 71, up to 8 Group
Sequences can be set up.
1. As described earlier, the Group Sequence determines
which monitor is to be connected with which camera.
Therefore, selecting a monitor is not required.
2. Select G-seq (A2) Menu on the LCD by pressing the
Cursor Keys.
A2
G-Seq
3. Select the desired Group Sequence number by press-
ing the Function Keys (F3/F4) or the Numeric Keys.
G-Seq
F1 F2
MON
ESC
G-Seq
4. Press the Function (F1) Key to run the selected Group
Sequence.
G-Seq
F1 F2
G-Seq
Monitor 16
-104-
< >
< >
F3 F4
1 2 3
4 5 6
7 8 9
0
CAM
SET
1
< >
1
< >
F3 F4
01