Clock Priority [1-3] - Panasonic KX-TDA100 Features Manual

4.7 Configuration [1]
Value Range
ON, OFF
Programming Guide References
None
Feature Guide References
1.22.1 Portable Station (PS) Connection
Personal Identification Number
Specifies the Personal Identification Number (PIN) of the PBX used to avoid unexpected registration to
another PBX.
Note that the same PIN of the PBX should be registered into the PS, before the PS is registered to the PBX.
Default
1234
Value Range
4 digits (consisting of 0–9)
Installation Manual References
2.8.7 Connecting a Cell Station to the Hybrid IP-PBX
Programming Guide References
None
Feature Guide References
1.22.1 Portable Station (PS) Connection

4.7.15 Clock Priority [1-3]

Slot
Selects and prioritizes slot numbers for the PRI and T1 cards that provide the external clock pulse to the
PBX.
Obtain the master clock from the CO line that the telephone company provides.
To change Clock Priority, follow the steps below:
1.
Assign a Clock Priority to each PRI and/or T1 card.
2.
Set the status of the present clock source card to "OUS", then "INS".
Note
If multiple PBXs are used to establish a private network (TIE line service, QSIG network, etc.) without
being connected through the telephone company, assign only one PBX as the clock source on the
network.
396 Feature Guide