Speed Dialing & Caller Id-Isdn Clip Modification [6-1-3] - Panasonic KX-TDA100 Features Manual

Feature Guide References
1.16.1 Caller ID
Added Number
Specifies the number to be added to the incoming caller's number in the place of the removed digits.
Default
Local / International Call Data 1–10: Not stored.
Long Distance Code: 1 (fixed)
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Programming Guide References
None
Feature Guide References
1.16.1 Caller ID
4.12.3 Speed Dialing & Caller ID—ISDN CLIP Modification [6-1-3]
When incoming caller information is sent through an ISDN line and the type of the network numbering plan
is International, National, or Subscriber, the caller's number can be modified as programmed in the
Modification Tables assigned to the CO line group. The modified number will then be recorded, and it is used
for sending to the network as a CLIP number.
A maximum of 4 ISDN CLIP Modification Tables can be programmed. Select the desired table from the
Modification Table list.
Removed Number of Digits
Specifies the number of leading digits to be removed from the incoming caller's number for each type of the
network numbering plan.
Default
0
Value Range
0–9
Programming Guide References
None
Feature Guide References
1.16.1 Caller ID
4.12 Feature [6]
Feature Guide 697