Dil Table & Port Setting [10-2] - Panasonic KX-TDA100 Features Manual

Feature Guide References
1.18.4 Display Information
Trunk Group Number
Specifies the CO line group number to which the CO line belongs.
Default
1
Value Range
1–64
Programming Guide References
None
Feature Guide References
2.2.2 Group
4.16.2 DIL Table & Port Setting [10-2]
Direct In Line (DIL) or Direct Inward Dialing (DID) can be selected for each CO line as the method of
distributing incoming CO line calls to certain destinations. For each CO line to which the DIL distribution is
set, different destinations can be programmed depending on the time mode (day/lunch/break/night). If
desired, Calling Line Identification (CLI) distribution can be used in conjunction with the DIL distribution.
DID / TIE
For each CO line to which DID distribution is set, or for each CO line whose Trunk Property on this screen
is Private (TIE), modification parameters for DID number and TIE line call numbers can be programmed.
Slot
Indicates the slot position of each CO line card (reference only).
Default
Current slot number
Value Range
Slot number
Feature Guide References
None
Port
Indicates the port number (reference only).
4.16 CO & Incoming Call [10]
Feature Guide 727