Panasonic KX-TDA100 Features Manual page 540

4.8 System [2]
Programming Guide References
None
Feature Guide References
1.28.1 IP Proprietary Telephone (IP-PT)
Voice(RTP) Port No. (IP-EXT Card)
Specifies the UDP port used by the IP-EXT card to transmit and receive RTP (Realtime Transfer Protocol)
data. This must be changed if another network application is using the same port.
For voice communications, an IP-EXT card uses 64 contiguous UDP ports, starting from the port number
specified here.
Default
8000
Value Range
1024–65472
Programming Guide References
None
Feature Guide References
1.28.1 IP Proprietary Telephone (IP-PT)
Voice(RTP) Port No. (IP-PT)
Specifies the UDP port used to transmit and receive RTP (Realtime Transfer Protocol) data on the IP-PT
side. This must be changed if another network application is using the same port.
For voice communications, an IP-PT uses 64 contiguous UDP ports, starting from the port number specified
here.
Default
8000
Value Range
1024–65472
Programming Guide References
None
Feature Guide References
1.28.1 IP Proprietary Telephone (IP-PT)
540 Feature Guide