Panasonic KX-TDA100 Features Manual page 715

Feature Guide References
1.9.1 Automatic Route Selection (ARS)
Removed Number of Digits
Specifies the number of leading digits to remove from the user-dialed number.
Default
0
Value Range
0–15
Programming Guide References
None
Feature Guide References
1.9.1 Automatic Route Selection (ARS)
Modify Command
Specifies the commands to modify the user-dialed number to access the carrier.
Default
CH
Value Range
C: Adds the Carrier Access code
P: Inserts a pause and changes to tone (DTMF) signal
A: Adds the Authorization code for a tenant
G: Adds the Authorization code for a CO line group
I: Adds the Itemized Billing code
H: Adds the dialed number after the programmed number of digits are removed (Home position)
Number: Adds the number
Programming Guide References
None
Feature Guide References
1.9.1 Automatic Route Selection (ARS)
Carrier Access Code
Specifies the carrier access code. The carrier access code can be added to the user-dialed number by
specifying "C" command in Modify Command on this screen.
4.14 ARS [8]
Feature Guide 715