Last Number Redial - Panasonic KX-TDA100 Features Manual

Feature References
1.18.2 Flexible Buttons
Operation References
1.2.2 Easy Dialing
1.6.1.3

Last Number Redial

Description
Every extension automatically saves the last external telephone number dialed, allowing the same number
to be dialed again.
Automatic Redial
If Last Number Redial is performed in hands-free mode and the called party is busy, the number will be
automatically redialed a preprogrammed number of times (→ Automatic Redial Repeat Times [205]) at 60-
second intervals.
This feature is available only on certain proprietary telephone (PT) models which have the SP-PHONE
button.
Outgoing Call Log
Information on outgoing CO line calls is automatically logged at each extension. Users of display PTs can
view details of a preset number of recently dialed telephone numbers, and easily call the same outside party
again.
Conditions
• Memorized telephone numbers are replaced by new ones.
• Automatic Redial is canceled if any dialing operation is done, an incoming call is answered during
Automatic Redial, or the Redial Call No Answer Ring time expires.
The Redial Call No Answer Ring time is programmable.
• Automatic Redial is only available for calls that are dialed using a PRI line.
• Interrupt Redial
When the called party or the seized CO line is busy, it is possible to press the REDIAL button
continuously until the called party or the CO line becomes idle. There is no need to go off-hook before
pressing the REDIAL button.
• Outgoing Call Log Display by REDIAL Button
The REDIAL button can be programmed through system programming to display the Outgoing Call
Log. This feature is available for display PT users while on-hook.
• If the Outgoing Call Log is used to redial an outside party, or a number already stored in the Outgoing
Call Log is manually redialed again, the number will be stored in the call log multiple times. However,
calls made using the REDIAL button are not stored in the Outgoing Call Log again.
• It is possible to change the number of records that can be stored at each extension through system
programming.
Operation References
1.2.3 Redial
1.6 Memory Dialing Features
Feature Guide 75