4.7 Configuration [1]
Default
10 pulse/s
Value Range
10 pulse/s, 20 pulse/s
Feature Guide References
None
Wink Signal Time Out
Specifies the length of time that the PBX waits before receiving a wink signal after seizing a CO line.
Default
1024 ms
Value Range
64 × n (n=1–128) ms
Feature Guide References
None
Start Signal Type
Selects the type of the start signal.
Default
Wink
Value Range
Immediate: Sends the dialed digits to the CO line when the First Dial Timer expires.
Wink: Sends the dialed digits to the CO line when the wink signal is received.
Feature Guide References
None
Sending Caller ID to TIE/DID
Specifies whether Caller ID information is sent when the channel type is TIE or DID.
Default
No
Value Range
Yes, No
Feature Guide References
None
420
Feature Guide