Dell 2130cn Service Manual page 388

Step
Checking after reseating the HOLDER ASSY SEPARATOR
25 Reseat the HOLDER ASSY SEPARATOR.
Is the image printed correctly?
Checking after replacing the HOLDER ASSY SEPARATOR
Replace the HOLDER ASSY SEPARATOR. (Refer to
26
Removal 2/Replacement 52.)
Is the image printed correctly?
Checking after replacing the ROLL ASSY FEED
Replace the ROLL ASSY FEED. (Refer to Removal 9/
27
Replacement 45.)
Is the image printed correctly?
Checking the ROLL ASSY REGI and ROLL REGI METAL
for rotation
Enter the [Digital Output] - [DO-0] in [CE Diag] tab, and then
enter the [Digital Output] - [DO-27] in [CE Diag] tab of [CE
28 Diag].
Does the ROLL ASSY REGI and ROLL REGI METAL
rotate?
During this check, cheat the interlock switch (HARN ASSY
INTERLOCK).
Check
1 - 362
Chapter 1 Troubleshooting
Remedy
Yes
End of work. Go to step 26.
End of work. Go to step 27.
End of work. Go to step 28.
Replace the ROLL
ASSY REGI and/
End of work.
or ROLL REGI
METAL.
No