Dell 2130cn Service Manual page 431

Clutch and Solenoid name
(Diag. Code)
CASSETTE 2 FEED MOTOR
(DO-17,18,19,1a)
Fan (HIGH)/ FAN (LOW)
(DO-1e ,1f)
NOTE: This procedure is for the technical staff. The customer check is
the procedure 1, 4 and 5.
The rotational speed of the motor is as follows.
DO-1a<DO-19<DO-18<DO-17
1) Turn on the power and enter the Diagnostic Mode.
2) Remove the CASSETTE 2 paper cassette.
3) Remove the COVER REAR OPT (PL12.1.6) and COVER SIDE
L OPT (PL12.1.4).
4) Execute the DO-17. (The customer can confirm the motor
noise only.)
CASSETTE2 Feed Motor
5) Press the "Cancel" key to stop the test.
6) Replace the COVER REAR OPT (PL12.1.6) and COVER SIDE
L OPT (PL12.1.4).
7) Replace the CASSETTE 2 paper cassette.
1) Turn on the power and enter the Diagnostic Mode.
2) Execute the DO-1e.
3) Check the FAN rotation.
4) Press the "Cancel" key to stop the test.
2 - 25
Chapter 2 Operation of Diag.
Confirmation procedure
Rio02055KA
Rio02015KA