Dell 2130cn Service Manual page 48

Error Message
Panel Message
Load SSF
024-969
Flip
Load SSF
XX
Flip
Load SSF
YY
XX: Paper Size
YY: Paper Type
Pause Feed SSF
024-985
Flip
Press Set
to Feed
Over Heat
042-700
Flip
Cooling down
Please WaitÅc
Paper Jam
071-100
Flip
Open Tray1
Remove Paper
Flip
Open & Close Front
Cover
Paper Jam
072-100
Flip
Open Tray2
Remove Paper
Flip
Open & Close Front
Cover
Paper Jam
072-101
Flip
Open Tray1 or 2
Remove Paper
Flip
Open & Close
Front Cover
Status Window
No paper detected.
Load the specified paper in
SSF.
Paper Size: XX
Paper Type: YY
024-969
No Message.
An internal temperature of
the printer became a high
temperature.
Please wait for a while until
falling in temperature.
042-700
Paper Jam has occurred at
the Tray 1.
Remove the Tray 1 and
remove the jammed paper.
Open and close the Front
Cover.
Please click the Show Me
How Button for details.
071-100
Paper Jam has occurred at
the Tray 2.
Remove the Tray 2 and
remove the jammed paper.
Open and close the Front
Cover.
Please click the Show Me
How Button for details.
072-100
Paper Jam has occurred at
the Tray 1 or 2.
Remove the Tray 1 or 2, and
remove the jammed paper.
Open and close the Front
Cover.
Please click the Show Me
How Button for details.
072-101
Error Contents
<No suitable paper>
The paper empty is detected.
<No suitable paper>
The paper empty is detected.
<IOT Over Heat Stop>
The temp. sensor sensed high
temperature. The error displayed only at
the time of Duplexer connection.
<IOT Tray1 Misfeed JAM>
Regi Sensor is not turned ON within the
specified time after feeding a paper from
Tray 1.
<IOT Tray2 Misfeed JAM>
Regi Sensor is not turned ON within the
specified time after feeding a paper from
Tray 2.
<IOT Feeder2 JAM>
The paper remains at the Regi Sensor.
1 - 22
Chapter 1 Troubleshooting
FIP to be
referred
Flows 40
FIP-1. 40
Flows 40
FIP-1. 40
Flows 41
FIP-1. 41
Flows 42
FIP-1. 42
Flows 43
FIP-1. 43
Flows 44
FIP-1. 44