Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 30 KIT SHAFT PIVOT (PL1.2.98)
Note: Described below is the replacement procedure common among the left and right sides of
the SHAFT PIVOTs (PL1.2.23).
1) Mate the flat face of the SHAFT PIVOT
with the hole of the COVER ASSY FRONT,
push the SHAFT PIVOT until the hook is
locked.
Go to the next replacement step:
Replacement 53 Tray 1 (PL2.1.1)
3 - 215