Chapter 3 Removal and Replacement Procedures (RRPs)
13) Pull out the PIVOT TRANS L
(PL6.1.4), remove the GEAR T4 (PL6.1.5)
from the printer.
14) Remove the one screw (silver, tap,
8mm) that fixes the SHAFT ASSY PIVOT
(PL6.1.6) to the printer.
Note: When carrying out the work described next procedure, keep the TRANSFER ASSY slightly
lifted for ease of work.
15) Pull out the SHAFT ASSY PIVOT from
the printer.
3 - 39