Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 23 KIT DRIVE ASSY PH (PL7.1.99)
Accesses Position (All the numbers show the procedure number.)
6)
1) Attach the GEAR P2 to the shaft of
DRIVE ASSY SUB.
Note: Ensure that the GEAR P2 is
oriented to the direction shown in the
right.
2) Engage the connector (J261) of the
HARN ASSY KSNR REGCL with the Color
mode switching sensor of the DRIVE
ASSY PH, route the HARN ASSY KSNR
REGCL through the hook of the DRIVE
ASSY PH.
3 - 195