Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 24 CLUTCH ASSY DRV (PL3.1.1), BEARING REGI (PL3.1.2)
1) Attach the BEARING REGI to the shaft
of the ROLL ASSY REGI, secure the
BEARING REGI with the hooks.
2) Mate the notch of the CLUTCH ASSY
DRV with the rib of the DRIVE ASSY PH,
secure the CLUTCH ASSY DRV to the
ROLL ASSY REGI with the E-ring by using
a pliers.
3) Route the harness of the CLUTCH
ASSY DRV through the hook of the DRIVE
ASSY PH.
3 - 198