Chapter 3 Removal and Replacement Procedures (RRPs)
8) Secure the FRAME ASSY LVPS to the
printer with the two screws (silver, M4,
6mm) and the six screws (silver, tap,
8mm).
9) Mate the hooks of the GUIDE
HARNESS FSR with the holes of the
FRAME ASSY LVPS, move the GUIDE
HARNESS FSR to secure it.
10) Route the harness of the HARN ASSY
FUSER2 and the harness of the HARN
ASSY INTERLOCK along the GUIDE
HARNESS FSR.
3 - 162