Clutch and Solenoid name
(Diag. Code)
CASSETTE 2 FEED SOLE-
NOID(Auto OFF) (DO-31)
NOTE: This procedure is for the technical staff. The customer check is
the procedure 1, 3 and 4.
1)
Turn on the power and enter the Diagnosis Mode.
2)
Remove the COVER REAR OPT (PL12.1.6) and COVER SIDE
L OPT (PL12.1.4).
3)
Execute the DO-31. (The customer can confirm the Solenoid
click sound only.)
4)
Check the FEED SOLENOID movement.
5)
Press the "Cancel" key to stop the test.
6)
Replace the COVER REAR OPT (PL12.1.6) and COVER SIDE
L OPT (PL12.1.4).
2 - 29
Chapter 2 Operation of Diag.
Confirmation procedure
CASSETTE2 Feed Solenoid
Rio02056KA