D-Link DES-1228 Reference Manual page 243

config gratuitous_arp periodical_send
Restrictions
Example usage:
To configure gratuitous ARP intervals for the IPIF System:
DES-1228/ME:4#config gratuitous_arp send periodically ipif System interval 5
Command: config gratuitous_arp send periodically ipif System interval 5
Success.
DES-1228/ME:4#
enable gratuitous_arp trap and log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the System's interface gratuitous ARP log and trap:
DES-1228/ME:4#enable gratuitous_arp System trap log
Command: enable gratuitous_arp System trap log
Success.
DES-1228/ME:4#
disable gratuitous_arp trap and log
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
<value 0-65535> − Periodically send gratuitous ARP interval time in seconds. 0- means it
will not send gratuitous ARP periodically.
Only Administrator-level users can issue this command.
Used to enable the gratuitous ARP trap and log.
enable gratuitous_arp {ipif <ipif_name 12 >} {trap | log}(1)
The command is used to enable gratuitous ARP trap and log states. The switch can trap
and log the IP conflict event to inform the administrator. By default, the trap is disabled and
event log is enabled.
<ipif_name 12> − Interface name of L3 interface.
Only Administrator-level users can issue this command.
Used to disable the gratuitous ARP trap and log.
disable gratuitous_arp {ipif <ipif_name 12>} {trap | log}(1)
The command is used to disable the gratuitous ARP trap and log states. The switch can
trap and log the IP conflict event to inform the administrator. By default, the trap is
disabled and event log is enabled.
<ipif_name 12> − Interface name of L3 interface.
Only Administrator-level users can issue this command.
238