D-Link DES-1228 Reference Manual page 300

The switch history commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command
config arp_spoofing_prevention
show arp_spoofing_prevention
config arp_spoofing_prevention
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To configure ARP spoofing prevention:
DES-1228/ME:4#config arp_spoofing_prevention add gateway_ip 10.90.90.1 gateway_m
ac 00-12-34-56-78-90 ports all
Command: config arp_spoofing_prevention add gateway_ip 10.90.90.1 gateway_mac 00
-12-34-56-78-90 ports all
Success.
DES-1228/ME:4#
show arp_spoofing_prevention
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display ARP spoofing prevention configuration:
DES-1228/ME:4#show arp_spoofing_prevention
Command: show arp_spoofing_prevention
Gateway IP
---------------
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
ARP S
Parameters
[add gateway_ip <ipaddr> gateway_mac <macaddr> ports [<portlist>|all] |
delete gateway_ip <ipaddr>]
This command is used to configure ARP spoofing prevention.
config arp_spoofing_prevention [add gateway_ip <ipaddr> gateway_mac
<macaddr> ports [<portlist>|all] | delete gateway_ip <ipaddr>]
This command is used to configure ARP spoofing prevention.
gateway_ip <ipaddr> - The user can enter the Gateway IP address in here.
gateway_mac <macaddr> - The user can enter the Gateway MAC address in here.
<portlist> - The user can either specify the port(s) or select all ports.
Only Administrator-level users can issue this command.
This command is used to display the ARP spoofing prevention configuration.
show arp_spoofing_prevention
This command is used to display the ARP spoofing prevention configuration.
None.
None.
Gateway MAC
-----------------
A
POOFING TTACK
Ports
---------------------------
295
46
P
REVENTION
L
IST