D-Link DES-1228 Reference Manual page 46

Example usage:
To create an SNMP group named "sg1:"
DES-1228/ME:4#create
notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view v1 write_view v1 notify_view
v1
Success.
DES-1228/ME:4#
delete snmp group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP group named "sg1".
DES-1228/ME:4#delete snmp group sg1
Command: delete snmp group sg1
Success.
DES-1228/ME:4#
show snmp groups
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
snmp group sg1
Used to remove an SNMP group from the Switch.
delete snmp group <groupname 32>
The delete snmp group command is used to remove an SNMP group from the Switch.
<groupname 32> − An alphanumeric name of up to 32 characters that will identify the
SNMP group the new SNMP user will be associated with.
Only Administrator-level users can issue this command.
Used to display the group-names of SNMP groups currently configured on the Switch. The
security model, level, and status of each group are also displayed.
show snmp groups
The show snmp groups command displays the group-names of SNMP groups currently
configured on the Switch. The security model, level, and status of each group are also
displayed.
None.
None.
v3 noauth_nopriv
41
read_view v1 write_view v1