D-Link DES-1228 Reference Manual page 254

delete igmp_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete an IGMP snoop multicast VLAN:
DES-1228/ME:4# delete igmp_snooping multicat_vlan v1
Command: delete igmp_snooping multicat_vlan v1
Success.
DES-1228/ME:4#
enable igmp_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable IGMP snoop multicast VLAN:
DES-1228/ME:4# enable igmp_snooping multicast_vlan
Command: enable igmp_snooping multicast_vlan
Success.
DES-1228/ME:4#
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to delete a multicast VLAN.
delete igmp_snooping multicast_vlan <vlan_name 32>
The delete igmp_snooping multicast_vlan command allows you to delete multicat_vlan.
<vlan_name 32> − The name of the multicast VLAN to be deleted.
Only Administrator-level users can issue this command.
Used to enable the multicast VLAN function.
enable igmp_snooping multicast_vlan
This command controls the multicast VLAN function. The ISM VLAN will take effect when
igmp snooping multicast vlan is enabled. By default, the multicast VLAN is in a disabled
state.
None.
Only Administrator-level users can issue this command.
249