D-Link DES-1228 Reference Manual page 298

To configure filtering trap logs for the DHCP Server:
DES-1228/ME:4#config filter dhcp_server trap_log enable
Command: config filter dhcp_server trap_log enable
Success.
DES-1228/ME:4#
config filter dhcp_server illegal_server_log_suppress_duration
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the filtering illegal server log duration for the DHCP Server:
DES-1228/ME:4#config filter dhcp_server illegal_server_log_suppress_duration 30min
Command: config filter dhcp_server illegal_server_log_suppress_duration 30min
Success.
DES-1228/ME:4#
Each command is listed, in detail, in the following sections.
show filter dhcp_server
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the configuration of filtering on the DHCP Server:
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
This command is used to configure the filtering illegal server log duration for the DHCP
Server.
config filter dhcp_server illegal_server_log_suppress_duration [1min | 5min |
30min]
This command is used to configure the filtering illegal server log duration for the DHCP
Server.
[1min | 5min | 30min] – The user can choose from 1, 5 and 30 min for the duration.
Only Administrator-level users can issue this command.
This command is display the configuration of filtering on the DHCP Server.
show filter dhcp_server
This command is display the configuration of filtering on the DHCP Server.
None.
None.
293