D-Link DES-1228 Reference Manual page 40

Example usage:
To delete a previously entered SNMP user on the Switch:
DES-1228/ME:4#delete snmp user dlink
Command: delete snmp user dlink
Success.
DES-1228/ME:4#
show snmp user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the SNMP users currently configured on the Switch:
DES-1228/ME:4#show snmp user
Command: show snmp user
Username Group Name
-------- ------------
initial initial
Total Entries: 1
DES-1228/ME:4#
create snmp view
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to display information about each SNMP username in the SNMP group username
table.
show snmp user
The show snmp user command displays information about each SNMP username in the
SNMP group username table.
None.
Only Administrator-level users can issue this command.
SNMP Version
------------
V3
Used to assign views to community strings to limit which MIB objects and SNMP manager
can access.
create snmp view <view_name 32> <oid> view_type [included | excluded]
The create snmp view command assigns views to community strings to limit which MIB
objects an SNMP manager can access.
<view_name 32> − An alphanumeric string of up to 32 characters that identifies the SNMP
view that will be created.
<oid> − The object ID that identifies an object tree (MIB tree) that will be included or
excluded from access by an SNMP manager.
view type – Sets the view type to be:
included − Include this object in the list of objects that an SNMP manager can
•
access.
excluded − Exclude this object from the list of objects that an SNMP manager can
•
access.
Only Administrator-level users can issue this command.
Auth-Protocol
----------------
None
35
PrivProtocol
-----------------
None