D-Link DES-1228 Reference Manual page 43

Example usage:
To create the SNMP community string "dlink:"
DES-1228/ME:4#create snmp community dlink view ReadView read_write
Command: create snmp community dlink view ReadView read_write
Success.
DES-1228/ME:4#
delete snmp community
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP community string "dlink:"
DES-1228/ME:4#delete snmp community dlink
Command: delete snmp community dlink
Success.
DES-1228/ME:4#
show snmp community
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
Used to remove a specific SNMP community string from the Switch.
delete snmp community <community_string 32>
The delete snmp community command is used to remove a previously defined SNMP
community string from the Switch.
<community_string 32> − An alphanumeric string of up to 32 characters that is used to
identify members of an SNMP community. This string is used like a password to give
remote SNMP managers access to MIB objects in the Switch's SNMP agent.
Only Administrator-level users can issue this command.
Used to display SNMP community strings configured on the Switch.
show snmp community {<community_string 32>}
The show snmp community command is used to display SNMP community strings that
are configured on the Switch.
<community_string 32> − An alphanumeric string of up to 32 characters that is used to
identify members of an SNMP community. This string is used like a password to give
remote SNMP managers access to MIB objects in the Switch's SNMP agent.
None.
38