Show Events - HP P2000 G3 Cli Reference Manual

show events

Description Shows events logged by each controller in the storage system. A separate set of event numbers is
maintained for each controller. Each event number is prefixed with a letter identifying the controller
that logged the event.
Events are listed from newest to oldest, based on a timestamp with one-second granularity; therefore
the event log sequence matches the actual event sequence within about one second.
For further information about diagnosing and resolving problems, see:
• The troubleshooting chapter and the LED descriptions appendix in your product's User Guide
• The topic about verifying component failure in the component's replacement instructions
document
These and other HP documents can be found on the Software Support/Documentation CD shipped
with your product or at http://www.hp.com/go/p2000/manuals. For links to additional
information about your product, see
http://www.hp.com/go/msa. For product support and to download drivers and software, see
http://www.hp.com/support. To access HP's Guided Troubleshooting website, see
http://www.hp.com/go/p2000/Troubleshooting.
Syntax To show a certain number of events:
show events
[detail]
[last #]
[a|b|both|error]
To show events by time:
show events
[detail]
[from timestamp]
[to timestamp]
[a|b|both|error]
To show events by ID:
show events
[detail]
[from-event event-ID]
[to-event event-ID]
[a|b|both|error]
Parameters detail
Optional. Shows additional information and recommended actions for displayed events. This
information is also in the Event Descriptions Reference Guide.
last #
Optional. Shows the latest specified number of events. If this parameter is omitted, all events are
shown.
from timestamp
Optional. Shows events including and after a timestamp specified with the format MMDDYYhhmmss.
For example, 04301 1235900 represents April 30 201 1 at 1 1:59:00 p.m. This parameter can be used
with the to parameter or the to-event parameter.
to timestamp
Optional. Shows events before and including a timestamp specified with the format
MMDDYYhhmmss. For example, 04301 1235900 represents April 30 201 1 at 1 1:59:00 p.m. This
parameter can be used with the from parameter or the from-event parameter.
228 Alphabetical list of commands
http://www.hp.com/go/p2000 or