Auto-Write-Through-Trigger; Auto-Write-Through-Trigger Properties - HP P2000 G3 Cli Reference Manual

auto-write-through-trigger

Properties
Table 1 1

auto-write-through-trigger properties

Name
controller-
failure
super-cap-
failure
compact-flash-
failure
power-supply-
failure
fan-failure
temperature-
exceeded
partner-notify
auto-write-back
Example
# show auto-write-through-trigger
...
<OBJECT basetype="auto-write-through-trigger" name="awt-triggers" oid="1"
format="pairs">
<PROPERTY name="controller-failure" type="string">Enabled</PROPERTY>
<PROPERTY name="super-cap-failure" type="string">Enabled</PROPERTY>
<PROPERTY name="compact-flash-failure" type="string">Enabled</PROPERTY>
<PROPERTY name="power-supply-failure" type="string">Enabled</PROPERTY>
<PROPERTY name="fan-failure" type="string">Enabled</PROPERTY>
Type Description
Shows whether the cache policy will change from write-back to write-through
string
when a controller fails.
• Disabled: The controller failure trigger is disabled. This is the default.
• Enabled: The controller failure trigger is enabled.
Shows whether the cache policy will change from write-back to write-through
string
when the super-capacitor that provides backup power for cache is not fully
charged or fails.
• Disabled: The super-capacitor failure trigger is disabled.
• Enabled: The super-capacitor failure trigger is enabled. This is the default.
Shows whether the cache policy will change from write-back to write-through
string
when CompactFlash memory is not detected during POST (Power-On Self-Test),
fails during POST, or fails during controller operation.
• Disabled: The CompactFlash failure trigger is disabled.
• Enabled: The CompactFlash failure trigger is enabled. This is the default.
Shows whether the cache policy will change from write-back to write-through
string
when a power supply fails.
• Disabled: The power-supply failure trigger is disabled. This is the default.
• Enabled: The power-supply failure trigger is enabled.
Shows whether the cache policy will change from write-back to write-through
string
when a fan fails.
• Disabled: The fan failure trigger is disabled. This is the default.
• Enabled: The fan failure trigger is enabled.
Shows whether the system will shut down a controller when its temperature
string
exceeds the critical operating range.
• Disabled: The over-temperature trigger is disabled. This is the default.
• Enabled: The over-temperature trigger is enabled.
Shows whether the partner controller will be notified when a trigger condition
string
occurs.
• Disabled: Notification is disabled; the partner controller will continue
using its current caching mode. This is the default.
• Enabled: Notification is enabled; the partner controller will change to
write-through mode for better data protection.
Shows whether the cache policy will change from write-through to write-back
string
when the trigger condition is cleared.
• Disabled: Auto-write-back is disabled.
• Enabled: Auto-write-back is enabled. This is the default.
HP P2000 G3 MSA System CLI Reference Guide 353