Io-Modules - HP P2000 G3 Cli Reference Manual

io-modules

Properties
Table 42 io-modules properties
Name
durable-id
controller-id
controller-id-
numeric
name
description
part-number
serial-number
revision
dash-level
fru-shortname
mfg-date
mfg-date-
numeric
mfg-location
mfg-vendor-id
position
position-
numeric
configuration-
serialnumber
phy-isolation
phy-isolation-
numeric
Type Description
I/O module ID.
string
• A: Controller A.
string
• B: Controller B.
Numeric equivalents for controller-id values.
string
•
0: B
•
1: A
FRU name.
string
FRU long description.
string
FRU part number.
string
FRU serial number.
string
FRU hardware revision level.
string
FRU template revision number.
string
FRU short description.
string
Date and time, in the format year-month-day hour:minutes:seconds
string
(UTC), when the controller's PCBA was programmed or a power supply module
was manufactured.
Unformatted mfg-date value.
string
City, state/province, and country where the FRU was manufactured.
string
JEDEC ID of the FRU manufacturer.
string
Fan unit position, as viewed from the back of the enclosure.
string
•
Top
•
Bottom
•
Left
•
Right
Numeric equivalents for position values.
string
•
0: Top
•
1: Bottom
•
2: Left
•
3: Right
Configuration serial number.
string
Shows whether the automatic disabling of SAS expander PHYs having high error
string
counts is enabled or disabled for this controller.
• Enabled: PHY fault isolation is enabled. This is the default.
• Disabled: PHY fault isolation is disabled.
Numeric equivalents for phy-isolation values.
string
•
0: Enabled
•
1: Disabled
HP P2000 G3 MSA System CLI Reference Guide 417