Power Button Functions - Dell PowerEdge FX2 Owner's Manual

Health indicator
failed power supply or
voltage regulator).
Temperature indicator
Condition
The indicator blinks amber if
the system experiences a
thermal error (for example, a
temperature out of range or
fan failure).
PCIe indicator
Condition
The indicator blinks amber if
a PCIe card experiences an
error.

Power button functions

The following section describes the different functions of the power button on your PowerEdge FX2/FX2s
enclosure.
Chassis power
The chassis power button is used to control power to the chassis and the
button and chassis
sleds. The chassis power button LED indicates the status of power to the chassis
power button LED
and the sleds:
•
•
Powering on the Press the chassis power button and the chassis power button LED changes from
chassis and sleds OFF to ON. If pressing the chassis power button does not change the power
button LED from OFF to ON, see the troubleshooting section.
Powering off the For a graceful shutdown of all the sleds and the chassis, press and hold the chassis
chassis and sleds power button for 4 to 10 seconds and release it.
12
Corrective Action
Ensure that none of the following conditions exist:
•
•
•
•
See
Corrective Action
Restart the sled. Update any required drivers for the PCIe
card. Reinstall the card. If the problem persists, see
Help.
If the LED is OFF, power to the chassis and the sleds is turned off.
If the LED is ON, power to the chassis and the sleds in turned on.
NOTE: Depending on the status of the sleds, graceful shutdown may not be
possible. You may opt for a forced shutdown by pressing and holding the
chassis power button for more than 10 seconds.
A cooling fan is removed or has failed.
The system cover, cooling shroud, EMI filler panel,
memory-module blank, or back-filler bracket is
removed.
Ambient temperature is too high.
External airflow is obstructed.
Getting Help.
Getting