Installing The System Cover - Dell PowerEdge FX2 Owner's Manual

NOTE: To ensure proper operation and cooling, replace the system cover within three minutes of
removal.
1. Ensure that you read the
2. Follow the procedure listed in
Steps
1. Rotate the cover lock counterclockwise to the unlock position.
2. Press the release latches on both sides of the system toward the cover lock.
3. Slide the cover toward the front of the system and lift the cover away from the system.
Figure 31. Removing and installing the system cover
1. release latch (2)
3. cover lock
Next steps
Install the system cover.
Related Tasks

Installing the system cover

Installing the system cover
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Follow the procedure listed in
3. Remove the system cover.
NOTE: You must remove the system cover to service components inside the system.
38
Safety instructions.
Before working inside your
Safety instructions.
Before working inside your
system.
2. system cover
system.