Table of Contents
Advertisement
Chapter 2 Preparations
(2)
26x 2.5-inch Drive Model
Follow the steps below to install a 2.5-inch PCIe SSD installation kit.
(a) Installing 2.5-inch PCIe SSD cage
1. See steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations. Remove the
six screws from protective cover, and remove the protective cover.
2.
Remove the blank cover of 2.5-inch additional HDD cage by pulling it.
3.
Align the projections (4 places) on the chassis with the holes on bottom of 2.5-inch PCIe SSD cage,
and slide the cage toward the rear of the chassis while pushing the cage lightly from top.
Note
Make sure that the turn-up portion of lower part of 2.5-inch PCIe SSD cage does
not get on the metal plate of bottom of the chassis.
Express5800/R120g-2E User's Guide
1. Installing Internal Optional Devices
111
Advertisement
Table of Contents
