NEC Exress5800 Series User Manual page 90

Chapter 2 Preparations
Product
number
Product name
High N8104-153 10GBASE-T Adapter (2ch)
(PCI Express 2.0(x8))
N8104-149 10GBASE Adapter (SFP+/2ch)
(PCI Express 2.0(x8))
N8103-142 SAS Controller
(PCI Express 2.0(x8))
N8104-152 1000BASE-T Adapter (4ch)
(PCI Express 2.0(x4))
N8104-145 1000BASE-T Adapter (2ch)
(PCI Express 2.0(x4))
N8104-151 1000BASE-T Adapter (2ch)
(PCI Express 2.0(x1))
N8104-150 1000BASE-T Adapter (1ch)
(PCI Express 2.0(x1))
N8117-01A Additional RS-232C connector
Low
Note
PCI cards are listed in order of priority for mounting in slots. Numbers in parentheses indicate the priority of each slot for each card.
If "–" is displayed, the card cannot be mounted.
Example: Suppose you want to mount a N8103-176 RAID Controller (1GB, RAID 0/1), N8190-158A Fibre Channel Controller (2ch)
(16Gbps/Optical), and N8103-142 SAS Controller. Select the controller to be mounted first based on the card priority, and then select
the slot to mount the card based on the slot priority. In this case, the controllers should be mounted in the following order:
RAID Controller to #3 (the highest priority), Fiber Channel Controller-#2 (#3 is already used), SAS Controller - #4 (#3 and #2 are
already used)
*1 Performance of LAN depends on the application and memory capacity. If you want to mount three or more 10G LAN cards, a
sufficient verification under your system environment is needed.
90
PCI #1
Slot number (2 CPUs PCI #2 PCI #3 PCI #4 PCI #5
required)
PCI standard PCIe 3.0
x8 x16
PCI slot performance
lane lane
x8 x16
Socket type
socket socket
Transfer bandwidth
(per lane)
Slot size
168mm
Available card size
max.
(4) (2)
(4) (2)
(4) (2)
(4) (2)
(4) (2)
(4) (2)
(4) (2)
－ －
Express5800/R120g-2E User's Guide
1. Installing Internal Optional Devices
PCIe
2.0
x8 x16 x4
lane lane lane
x8 x16 x8
socket socket socket
8Gb/s 5Gb/s
Low Profile
168mm
200mm max.
max.
For additional LAN
(1) (3) (5)
port.
(1) (3) (5) For additional LAN
port.
Prepare SFP+module
N8104-129 if needed.
(1) (3) (5) For connecting with
external devices
(1) (3) (5) For additional LAN port.
LAN cable with boots cannot be used.
For additional LAN port.
(1) (3) (5)
(1) (3) (5) For additional LAN port.
Card type: PCI Express 2.0 (x4)
(1) (3) (5) For additional LAN port.
Card type: PCI Express 2.0 (x4)
(1) (2) (3) For additional serial port B (RS-232C).
Only one card can be mounted.
Remarks
Up to three N8104-149,
N8104-153 and
N8104-157 cards can be
mounted in total in
1-CPU configuration.*1
Up to five N8104-149,
N8104-153 and
N8104-157 cards can be
mounted in total in
2-CPU configuration.*1
N8103-184 and
N8103-142 can be
mounted up to three
cards in total